Home
FAQ
Techboard
Albums
TurboFord Store
Equations
Spreadsheets
Links
Contact Us
Frequently Asked Question Categories:
Power Production Basics
Air Charge Density
Turbos
Compressor Maps
Intercoolers
Engine Airflow
2.3 Head Flow Comparison
Superflow's Flowbench FAQ
Superflow's Flowbench Test Tips
Lawrence Mayfield's Rod Ratio Analysis
Computer and Fuel System
Gas FAQ
How to make your own race gas
Ford Fuel Injectors data
Ignition
Common Maintenance, Repairs, and Upgrades
Boost Control
Cam Swap
SuperChip Install
Computer Swap
Fuel Injector Swap
Head Gasket Change
Ignition Maintenance
Intercooler Upgrades
Audi A4 front mount
Thunderbird stock location air/water
Volvo front-mount with rotated upper intake manifold
Radiator Fan Control Switch Install
Timing Belt Change
Turbo Swap
Uncommon Maintenance, Repairs, and Upgrades
The mythical 4 valve per cylinder 2.3T prototype (191k scan)
Recommended Modifications,
Stage 0: Get it running right
Stage 1: Boost, air filter, and knock sensor
Stage 2: Exhaust, plus cam, computer and injectors if needed
Stage 3: Serious intercooler
Stage 4: Serious turbo and ported exhaust manifold or header
Stage 5: Ported intake manifold and head
Stage 6: All-out race motor
Combo Examples
Rick Byrnes (200+mph Land Speed Record - Merkur XR4Ti)
Allan Moore (6.49@105 in 1/8th - Pinto)
Joe Morgan (10.7x@118 - Pinto)
Johnny Boos (11.76@116 - 83 Mustang)
Copyright © 1998-2008 by TurboFord,
All Rights Reserved
Page last updated: Friday, 28-Oct-2005 11:26:26 EDT